BTKTD - BF 470 NAPA DOT 3 BRAKE FLUID

  • MSDS: BTKTD
  • Manufacturer: OLIN CORP CHEMICALS GROUP
  • Product Name: BF 470 NAPA DOT 3 BRAKE FLUID
  • National Stock Number: 9150-01-052-6762
Product Identification

Product ID:BF 470 NAPA DOT 3 BRAKE FLUID
MSDS Date:04/23/1991
FSC:9150
NIIN:01-052-6762
MSDS Number: BTKTD

Responsible Party
OLIN CORP CHEMICALS GROUP
120 LONG RIDGE RD
STAMFORD, CT 06904
US

Emergency Phone: 203-356-3449,CHEMTREC 800-242-9300

Info Phone: 203-356-3449

Preparer: NONE

Cage: 53084

Contractor
OLIN CORP CHEMICALS GROUP
STAMFORD, CT 06904 US

Telephone: 203-356-3449,CHEMTREC 800-242-9300

Cage: 53084

Ingredients

GLYCOL ETHER (SARA III), (CAS NO. AND PERCENTAGE ARE


GLYCOL DERIVATIVE (CAS NO. AND PERCENTAGE ARE PROPRIETARY


GLYCOL DERIVATIVE, (CAS NO. AND PERCENTAGE ARE PROPRIETARY


GLYCOL ETHER (SARA III), (CAS NO. AND PERCENTAGE ARE


INHIBITOR PACKAGE (CAS NO. AND PERCENTAGE ARE PROPRIETARY


GLYCOL ETHERS


ESTER OIL CASTER


GLYCOL ETHERS


ALKYLAMINES


ADDITIVES

Hazards

LD50 LC50 Mixture:ORAL LD50 (RAT): > 5G/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DO NOT TAKE INTERNALLY. MAY CAUSE
MILD SKIN IRRITATION. MAY CAUSE MILD EYE IRRITATION. MAY CAUSE MILD
MUCOUS MEMBRANE IRRITATION. INGESTION MAY CAUSE GASTROINTESTINAL
DISCOMFORT.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:EYE IRRITATION, SKIN IRRITATION, NAUSEA,
VOMITING, LETHARGY, DIARRHEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSIST, GET MEDICAL
ATTENTION. INH ALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. GET
MEDICAL ATTENTION. INGESTION: IMMEDIATELY DRINK WATER TO DILUTE.
CONSULT A PHYSICIAN IF SYMPTOMS DEVELOP.

Fire Fighting

Flash Point:240F,116C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:ALCOHOL FOAM, CARBON DIOXIDE, DRY CHEMICAL, WATER
SPRAY.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE GEAR. COOL TANKS AND
CONTAINERS EXPOSED TO FIRE WITH WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:CONTAIN SPILLED MATERIAL. SPILL MATERIALS MAY
BE ABSORBED USING SAND, CLAY OR COMMERCIAL ABSORBENT. DO NOT PLACE
SPILL MATERIALS BACK IN THEIR ORIGINAL CONTAINER. DECONTAMINATE ALL
CLOTHING AND SPILL AREA USING A DETERGENT AND FLUSH WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT TAKE INTERNALLY. AVOID CONTACT
WITH SKIN, EYES AND CLOTHING. UPON CONTACT WITH SKIN OR EYES, WASH
OFF WITH WATER. AVOID CONTACT WITH MOISTURE.
Other Precautions:DO NOT STORE AT TEMPERATURES ABOVE 49C. MILD STEEL
CONTAINERS ARE SATISFACTORY FOR STORAGE.

Exposure Controls

Respiratory Protection:NONE REQUIRED UNDER NORMAL CONDITIONS. IF
VAPORS, MISTS OR AEROSOLS ARE GENERATED, WEAR A NIOSH/MSHA APPROVED
RESPIRATOR.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION AS
REQUIRED TO MAINTAIN EXPOSURE LEVELS.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:CHEMICAL RESISTANT CLOTHING AS NECESSARY TO
PREVENT SKIN CONTACT. AN EMERGENCY EYEWASH AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH HANDS THOROUGHLY WITH SOAP AND WATER
BEFORE EATING, DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:460F,238C
Melt/Freeze Pt:M.P/F.P Text:-60F,-51C
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:1.08
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:COMPLETE
Appearance and Odor:PALE YELLOW TO CLEAR BROWN LIQUID

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS.
Stability Condition to Avoid:EXCESSIVELY HIGH TEMPERATURES.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE

Disposal

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.